Tile Color Coating

Unhappy with the looks or the color of your roof?
Have us Change it!

Reduces roof surface temperatures thereby prolonging roof life and reducing interior temperatures and energy costs.

Your tile roof will last you a life time, but Florida is very hard on any surface out in the elements.

We can apply a new color to your roof tiles and make them look like they did when they were new.

OUR 10 STEP COLOR COATING PROCESS.

Clean:
STEP ONE: Clean roof with low pressure, high water volume tile roof surface cleaners. These cleaners remove dirt and debris from the roof without doing damage to the tile or shingles. This along with a mild detergent designed to clean without killing plants or grass will clean and remove any mold, algae, dirt and debris.

STEP TWO: Clean under all valley tiles to remove decomposing leaves and pine needles. Clogged up valleys are the leading reason for tile roof leaks, these clogs cause water to flow out across your roof and under your tiles until they rust out fasteners and rot your batten strips that hold tile roofs in place.

STEP THREE: Clean debris out of all gutters and down spouts. Clogged gutters will allow water to back up and rot out roof decking, soffit and fascia boards if left over a period of time.

STEP FOUR: Rinse off exterior of home to remove dirt and debris.

STEP FIVE: Rinse off driveways, patios and sidewalks.

Repair:
STEP SIX: Remove and replace any broken tiles that may cause leaking in the future. We also glue any tile corner chips that we find back into place.

STEP SEVEN: We check all ridge caps to be sure they are still secure and in place, we will fix any loose caps. All mortar on roof will also be inspected and retucked if needed.

STEP EIGHT: Check and seal all skylight, chimney, pipe stack and counter flashing on the roof. All flashings are inspected for rodent damage and will be repaired if needed. We will notify you of any rodent activity on the roof.

Coat:
STEP NINE: Spray roof with primer penetrant to solidify surface of concrete so we can apply color coats. This primer will make sure that the color coats adhere to the concrete.

STEP TEN: Spray two thick layers of color coating matched to the customers specifications and in the desired shine and sheen. All edges will be hand rolled to prevent over spray. These color coats are used by Florida's major roof tile manufactures and have the longest and best track record in Florida. They come with a strong mold and algae inhibitor to keep the roof looking good.

We hear stories weekly of other companies or individuals that have done damage to homeowners roofs and landscaping. Dead bushes and broken tile are the sign of an unlicensed roofer, if they aren't a licensed roofer they don't have insurance to be on your roof! Try to get insurance on your car if you don't have a drivers license, don't have your home damaged by an unlicesed individual. By law a Licensed state roofer must post their license number in all advertisements and company stationary, so if you don't see it they aren't licensed.
Ask for their CCC number, ours is CCC 1326693